When using rough terrain scissor lifts, it is really essential to use extra caution and be completely aware of your environment in order to be safe. The extended booms on the machine act as levers from the drive unit's center. For instance, a 6 inch bump could cause a 3 foot bounce when the operator is at the driver controls. Consider all other traffic in the vicinity, as they may not be aware that you are moving. Plan your assent cautiously. Park the boom lift on a flat surface that has no mud or water. These areas conceal deep potholes that could be probably cause the occupants to fall if the tires fell into the holes. If provided, use all of the outriggers, extended to their full extension position. Be sure to just utilize approved wooden chalk blocks.
Several lifts would operate from the end of the boom on a metal platform. Extended booms act levers on the drive unit. While you are at the driver controls, a 6-inch bump can lead to a 3-foot bounce. Consider all other traffic. They might not know that you are moving. Plan your assent. Park the boom lift on a flat surface free of any mud or water. These areas can cover deep potholes in which the lift tires can fall, tipping the occupants. Extend all outriggers, if provided, to the full extension position. Place just approved wooden chalk blocks beneath the outrigger pads in order to prevent the unit from moving.
Overhead power lines are a serious danger for lift drivers no matter what lift is being utilized. Like for instance, if the operator of the platform is not being aware, or if the platform is being controlled by personnel on the ground that could not accurately access proximity to wiring and therefore, either the worker or the platform itself can be easily brought into contact with electrical wires. The employee might be electrocuted unfortunately unless properly insulated.